This module covers thirty (30) hours of courses, required by the Occupational Health and Safety Act (OSHA), that apply toward 30-hour Construction Industry course completion card. This module is comprised of 23 sections, each either one or two hours in length, and covering topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help to meet the Construction Industry standards established by OSHA.

OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job.

You will be sent a copy of OSHA Standards for Construction. The book will serve as an invaluable resource for referencing OSHA standards that have been covered in this course, as well as researching regulations or standards that could help in establishing a safer workplace.

You will also find supplementary materials available for download by clicking the ""Materials"" tab on the menu located within the courseplayer. You can find printable course summaries of each module in addition to a syllabus of the entire 30 hour course. Other reference materials are available from the OSHA website; please visit www.osha.gov .

Once you have enrolled in this online course, you have six months from the time you signed up for this course to complete it in order to receive credit. After six months, your account will expire and you will be required to purchase the course again if you wish to complete it.

At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your outreach training.

Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course. You will be given up to three opportunities to pass the final exam.

Online courses are powered by 360Training.com.

For Customer Support Call 1-888-360-TRNG (1-888-360-8764)

Registered students may contact the online outreach trainer, Mike Millsap, with questions at mike.millsap@360training.com

PREREQUISITE: None

COURSE CONTENT :

1.	Introduction to OSHA
2.	OSHA
3.	OSHA Requirments & Practices
4.	General Safety & Health Provisions
5.	Employee Medical & Exposure Records, Means of Egress and Employee Emergency Action Plans
6.	Concrete & Masonry Construction [Subpart Q]
7.	Cranes & Rigging [Subpart W]
8.	Electrical Safety [Subpart K]
9.	Excavations [Subpart P]
10.	Fall Protection [Subpart M]
11.	Fire Protection [Subpart F]
12.	Hand & Power Tools [Subpart I]
13.	Scaffolding [Subpart L]
14.	Stairways & Ladders [Subpart X]
15.	Steel Erection [Subpart R]
16.	Materials Handling, Storage & Disposal [Subpart H]
17.	Motor Vehicles [Subpart O]
18.	Welding & Cutting [Subpart J]
19.	Record Keeping [29 CFR 1904]
20.	Final Exam

SYSTEM REQUIREMENTS:

The elements listed below are the minimum system requirements to take this online course. While you may use the minimum requirements, your experience online will be greatly enhanced through the use of a faster internet connection, i.e. cable or DSL as opposed to 'dial-up'.